Vertical Ladle Preheater/Dryer >VLP or >VLD is Self stand on a concrete foundation.
The burner is fixed into the burner shield, which is mounted Slew-able onto the vertical supporting structure.
The vertical dryer is used to heat up the new refractory in the ladle in a controlled way. The station is composed by a vertical dryer and is located on the concert foot ground.
The vertical ladle dryer consists of a circular cover with a centrally located burner. The burner develops a high-velocity, extended flame which brings the thermal energy down to the ladle bottom. The cover is lined with refractory fibers capable of withstanding temperatures up to 1000 in one hour and keeps it constant during 24 hours.
.jpg)
Vertical Ladle Preheater & Dryer Specifications
Vertical Preheater/ Dryer >VLP or >VLD is equipped with a Ceramic Fiber refractory on the Tundish Cover to bear 1000°C temperature during drying procedure that takes about 12 hr.
The heating system using a 1 central burner designed and tailored made by MIN-TEC during the know-how development. The Burner is designed for CNG but it could be redesigned for LPG, Heavy Fuel , and oil gas as well.
A Burner Controllers Unit >BCU , controls all the functions of the burner and also has an overall safety system as a built-in programming.
This controller is attached to a PLC to control the Performance of the drying Curve with as Doubled Safety Definitions .
At Service Position
On Rest Position
